Kit Review: Dragon Models Limited 1/72 Armor Pro
Series Kit No. 7308; Sd.Kfz. 251/2 Ausf. C Rivetted Version mit Grandatwerfer; 160 parts
(142 in grey styrene, 15 etched brass, 2 DS plastic track runs, 1 section of stiff wire);
price about US$13.98
Advantages: very nice, clean model of this popular vehicle in "small scale";
unique but effective method of assembling running gear; nicely done and VERY petite 8 cm
mortar (CAN be built as a "Stroke 2")
Disadvantages: RP parts (as in right puny!)
Rating: Highly Recommended
Recommendation: for all German WWII "Small Scale" fans
DML continues to roll along with their small scale halftrack series, and while nominally
the same as their kit No. 7306 (Sd.Kfz. 251/2 Ausf. C mit Wurfrahmen 40) it has a totally
new upper hull, brass detail set, and most importantly for a "Stroke 2" (8 cm
Mortar Carrier) the 8cm mortar and ammo bins.
The new upper hull, like the previous Cs and Ds, is not a pantograph of the larger kits
but is based on the same research and drawings. The lower hull is a single piece pan, less
the rear area, and the axles are molded on the lower hull. The running gear for each side
consists of a rear (inside) wheel section, a center wheel section, three outer road
wheels, and drivers. Once installed the connectors between the individual wheels on the
inside and the center are not visible, so it helps speed up assembly while making it
easier to get things aligned. Tracks are the gluable DS plastic, so you can also get them
to settle down on top of the road wheels with some care.
Most of the kit is the previous #7306 less the rockets but with some tweaks. The model
comes with both the C (welded) and new C (rivetted) upper hulls. To match the upper hull,
it provides five sections of etched brass (tinted a French brass reddish color) for the
lower hull applique to provide scale rivets. This is an odd way to do it but the panels
look close to scale for the rivets and some openings have been left to mount the fenders
through the brass to the hull.
Interior bits include the various control levers, rifles, MP submachine guns, and other
items. The hinge mechanisms for the doors are single pieces, but are non-operating types.
They cement to the lower rear section, as the upper hull has the rear angular parts of the
hull attached to it. The four front viewers are separate parts and can be cemented either
open or closed as well, as is the hood assembly with two flaps.
No engine or interior is provided for the engine bay.
The fenders are one-piece units, but the stowage bins are only offered as closed parts.
The front MG 34 shield is offered as either a single piece of styrene or a three-piece
etched brass option. Other RP parts include the "Notek" headlight and mount and
the drum magazines for the two MG 34 machine guns. The weapons appear to be very close to
scale, something I don't recall from other manufacturers in the past!
The 8cm mortar and base are comprised of six parts, using a convention of sorts with
mortars of having the muzzle and leg/sight connector molded as one section and the lower
barrel as another. Four styrene ammo carriers and a brass rack are provided to replace the
right rear seat in the interior.
Directions are standard DML fare, but due to the fewer parts in their 1/72 series kits
they are not as busy and much easier to read.
Painting and marking options are provided for three units: Unidentified unit, Eastern
Front 1942 (Sand); Unidentified unit, Eastern Front, 1942 (Grey); and Unidentified unit,
Russia 1942 (mud stripe camouflage over grey.) Two Cartograf sheets (targeted and license
plates) are provided.
Overall another nice effort, and for once (or twice, as there was a cyber-hobby.com
"Stroke 2" in 1/35 scale) this model will build up as a "Stroke 2"
variant.
Thanks to Freddie Leung of DML for the review sample.
Cookie Sewell
Sprue Breakdown:
A 32 C upper hull
B 38 C/D interior and road wheels
C 28x2 C front wheels and interior details
D 2 DS plastic track runs
F 10 8cm mortar and kit
G 5 C Rivetted upper hull
I 1 C lower hull
MA 15 etched brass
MB 1 antenna wire
|
