Kit Review: Dragon Models Limited 1/35 Scale '39-'45
Kit Number 6062; M4A2 Tarawa; 395 parts (329 parts in grey styrene, 43 etched brass, 20
clear styrene, 2 DS plastic track runs, 1 length of twisted steel wire); estimated retail
price US $38-41
Advantages: first integrated and accurate mid-production Sherman kit on the market; very
nicely done "low bustle" turret; track problems appear solved
Disadvantages: will not assemble itself (okay, no model kit will!)
Rating: Highly Recommended
Recommendation: For all "Shermaholics" and USMC fans
For many years the earlier models (early being defined as "Direct Vision" 56
degree hulls and mid-production as non-"direct vision" 56 degree hulls) of the
M4 series of US medium tanks have been ill served as model kits. There was an ancient
Airfix M4 kit of a mid-production M4 but it was not really very good. Most of the early
kits were limited to M4A1 cast hull types, and not the M4, M4A2 or M4A3 types.
Some years ago Tamiya offered an "Early Production" M4 but it was basically
little more than a new hull top for its older M4A3 47 degree late production hull with a
slightly modified turret. The lower hull was still that of the M4A3 with late production
bogies and also no sponson floors.
The M4A2 has been very poorly served, as all kits offered thus far have been the 47 degree
(late model or "wet stowage") hulls but with numerous errors in the Academy kits
and an original Italeri one which was actually an M4A3. So far the best M4A2, albeit the
late production 76mm one with the 47 degree hull, was the one from DML as its Soviet
offering.
DML has finally - after many years of advertising the M4A2 mid-production tank in its
catalogue - delivered, and the model is one of their best. Building on their recent M4A1
and M4A3 kits, this one uses the "A" or detail sprue from those kits (labeled as
"M4A2/A3"), the "C" or clear parts sprue, and the two "V"
sprues from the M4A1 76mm kit with a new hull, turret and other details.
What the modeler gets is a mid-production 56 degree hull M4A2 with welded drivers' hoods
and the "low bustle" turret (no loader's hatch) with the M34A1 gun mount with
wide cast mantelet. The wheels are the pressed steel welded type with backing plates
provided for the road wheels and idlers, and a choice of either "cast" or
"disk" driver rings of which the "cast" rings are more accurate for
this version. The VVSS
bogies are those with the "flat" return roller mounts and also pillow blocks to
raise the idlers. A "soft" or early cast transmission cover is provided
separately for the hull. (Yes, like all DML kits it HAS sponson floors in it.)
The turret is very neatly done and makes extensive use of slide molding to capture the
shape of the turret, especially around the pistol port on the left side. The M3 gun barrel
is also molded with a hollow bore. Likewise, the coaxial machine gun and even the turret
spotlight are also slide molded for accuracy. All details except the ventilator are
separate items on this turret, so it would be hard to ask for more in
styrene plastic.
The hull is correct all the way around, with a correct lower hull with twin access plates
to the two GMC diesel engines. The upper hull is beautifully done with scale weld bead
that stands proud of the hull - no more "trenches!" The A2 engine deck comes
with separate hatches but no interior (and I was wondering what to do with that Tank
Workshop GMC power pack for a mid-production A2 that I have had
sitting around for years...) Filler caps may be shown in either open or closed positions,
as can all of the periscopes and crew hatches.
The kit does not come with a commander's machine gun, but most of the Marine tanks do not
seem to have used them early in the war in the Pacific, so this is not a flaw per se.
From information I have on this kit, DML ran into problems with the tracks as there was no
good way to make a set of "Magic Track" - DML's current preferred method - that
would capture the three-piece design of the medium tank tracks. The solution - which
should be acceptable to most modelers as well as win DML friends with many frustrated
souls - was to make them in DS plastic, DML's gluable vinyl type tracks. The type selected
with this kit is the T54E1 style with solid steel chevrons and openings inside the ends,
and thanks to the flexible DS plastic it has also captured the end connector details as
well. Two links are used for connection at the ends, so one link could be trimmed out to
get a tighter fit if needed.
The etched brass supplied covers mostly small details such as the sand shield attachment
points along the sides of the hull, headlight guards, and fender components as well as the
commander's "blade" sight. No tie-downs or tool straps are supplied. Note that
to attach the tools holes must be opened up in the hull from the inside, and there is a
small guide given in Step 7 in the directions as to which holes are used. Also three
factory casting identifiers are included for use on the rear of the turret, but they are
not keyed to any specific tank nor any variations in the turret design.
Markings are included for six tanks from C Company 1st Tanks (COLORADO, COBRA, CUDDLES,
CHARLIE, CANNONBALL and CONDOR) and one from D Company (DESTROYER) of which the latter
also carries aircraft-type "stars and bars" insignia. Design credit is given to
Mike Canaday and Pawel Krupowicz.
Overall, this is a great effort and captures its subject very nicely. DML should be
congratulated for getting more of the A2 right than anybody else.
Thanks to Freddie Leung for the review sample.
Cookie Sewell
Sprue Breakout:
A 96 hull details (A2/A3)
B 50 Low bustle turret with M34A1 gun mount
C 20 Clear styrene
D 18 56 degree welded hull
F 2 DS plastic track runs
G 1 "round nose" transmission cover
S 1 twisted steel wire
V 81x2 VVSS flat top/pillow block suspension with pressed/welded wheels
X 1 Lower hull pan - M4A2
MA 43 etched brass
|
